Calibrated 8mm Diameter, 100N/22lb Force
This is a calibrated pair of a 8mm SingleTact sensor and I²C electronics board. It comes with 4 jumper wires and Calibration sheet.
The sensor and electronics are a matched pair, the calibration is stored on the electronics. You can use a tail extender with calibrated systems, but not interchange with other sensors.
This is a calibrated pair of a 8mm SingleTact sensor and I²C electronics board. It comes with 4 jumper wires and Calibration sheet.
The sensor and electronics are a matched pair, the calibration is stored on the electronics. You can use a tail extender with calibrated systems, but not interchange with other sensors.
This is a calibrated pair of a 8mm SingleTact sensor and I²C electronics board. It comes with 4 jumper wires and Calibration sheet.
The sensor and electronics are a matched pair, the calibration is stored on the electronics. You can use a tail extender with calibrated systems, but not interchange with other sensors.
DOWNLOADS
SENSOR PERFORMANCE
Force Resolution
Maximum Force
Typical Repeatability Error
Operating Temperature
Temperature Sensitivity
Linear Error
Drift
Hysteresis
Response Time
Contract Surface Material
Sensor Thickness
Typical Baseline Capacitance
ESD Sensitivity
Material Grade
< 0.2% of Full Scale (FSR)
300% of FSR
< 1.0% (1 sigma of FS)
-40°C < T < 85°C
< 0.2%/° C
< 2.0%
2% in 1 min, 4% in 10 min, at 50% FSR load
< 4.0%
< 1ms(Measured using Oscilloscope)
Polyimide
0.30mm
8mm 75 pF; 15mm: 230 pF @ 100 kHz
Not sensitive to ESD
UL grade 94 V-1 or better
ELECTRONICS SPECIFICATIONS
Update Rate
Analog Out
Digital Interface
IO Voltage
Supply Voltage
Input Current
Weight
RoHS
Operating Temperature
>120 Hz
0.5-1.5V
I²C (100kHz), 10-bit resolution
3.3V
3.7-5V
2.7 mA
Sensor 0.23g/ Electronics 1.6g
Compliant
-40°C < T < 85°C
SOFTWARE
Download Link For
Advance User Links
